Home / Plug and Wastes / Pop Down® Plug and Wastes
DESCRIPTION:
Australian Standard Patent 2016238907
STANDARD FINISH:
Chrome Plate
.04 Polished Brass (Raw/Living Finish)
The finishes shown above are only indicative of the actual product and should not be used for colour matching.
DESCRIPTION:
Australian Standard Patent 2016238907
STANDARD FINISH:
Chrome Plate
BATH WALL THICKNESS | S/S SCREW C/SUNK HD |
0 ~ 12 mm | M5 x 20 (SUPPLIED) |
12 ~ 22 mm | M5 x 30 |
22 ~ 32 mm | M5 x 40 |
32 ~ 42 mm | M5 x 50 |
42 ~ 52 mm | M5 x 60 |
52 ~ 62 mm | M5 x 70 |
Screw pack available for baths thicker than 12mm
Code: 29391 to suit 21831
.04 Polished Brass (Raw/Living Finish)
The finishes shown above are only indicative of the actual product and should not be used for colour matching.
To make the revolutionary Pop Down® waste suitable for the vast majority of baths we are adding 1 new product to this range. The “Bathdinger” Pop Down®. This new addition will ensure that everyone can enjoy the beauty and functionality of these products in their basin and bath.
Available finishes
Chrome, Polished Brass, Brushed Nickel, White, Brushed Gold and Matt Black.
DESCRIPTION:
Australian Standard Patent 2016238907
STANDARD FINISH:
Chrome Plate
.04 Polished Brass (Raw/Living Finish)
The finishes shown above are only indicative of the actual product and should not be used for colour matching.
Please fill out the form with your contact information and a brief description of how we can assist you.
We value your time and will make every effort to respond within 24 hours. Thank you for reaching out to us. We look forward to connecting with you soon.
After the installation of your Pop Down® waste, if you find that it does not hold water when closed there may be an installation issue. A simple test can be conducted to see if water is passing around the waste (in the case of an installation fault), or through the waste, which would be a product fault.
To test, close your Pop Down® waste and partially fill your basin with water. If the water empties from the basin but does not empty from the well above the Pop Down® mechanism, it would suggest an installation fault. In this case you would need to call the installing plumber.
If the water empties from the basin and also empties from the well above the Pop Down® mechanism, it would suggest a product fault. In this case, contact us and we will send a replacement mechanism.