Catalogues, spec sheets, installation guides, and flyers — everything you need to specify, sell, and install.
Complete product range including tapware, wastes, floor drains, and accessories. All 15 finishes shown.
Complete product range including tapware, wastes, floor drains, and accessories. All 15 finishes shown.
All 15 finishes shown at scale with finish names, codes, and coordinating product references.
Complete DWV, drainage, stormwater, and plumbing accessories range with product codes.
Complete product range including tapware, wastes, floor drains, and accessories. All 15 finishes shown.
All 15 finishes shown at scale with finish names, codes, and coordinating product references.
Please fill out the form with your contact information and a brief description of how we can assist you.
We value your time and will make every effort to respond within 24 hours. Thank you for reaching out to us. We look forward to connecting with you soon.
After the installation of your Pop Down® waste, if you find that it does not hold water when closed there may be an installation issue. A simple test can be conducted to see if water is passing around the waste (in the case of an installation fault), or through the waste, which would be a product fault.
To test, close your Pop Down® waste and partially fill your basin with water. If the water empties from the basin but does not empty from the well above the Pop Down® mechanism, it would suggest an installation fault. In this case you would need to call the installing plumber.
If the water empties from the basin and also empties from the well above the Pop Down® mechanism, it would suggest a product fault. In this case, contact us and we will send a replacement mechanism.
