Art Plumbing Products has an extensive range of pipe Clips to suit Lagged Copper, Polybutylene, Copper and Cross Link Polyethylene pipes. Our range includes a large variety of sizes to suit most pipe.
In each case below, we present a representative sample that can be ordered with a variety of fixing nails. Just add the suffix for each different fixing nail to the product code to order.
| DESCRIPTION | CODE | BAG QTY | CTN QTY |
|---|---|---|---|
| 1/2″ Copper – Masonry Nail | 39111 | 100 | 20 |
| 1/2″ Copper – Tek Screw | 39112 | 100 | 20 |
| 1/2″ Copper – Timber Nail | 39113 | 100 | 20 |
| 3/4″ Copper – Masonry Nail | 39114 | 100 | 15 |
| 3/4″ Copper – Tek Screw | 39115 | 100 | 15 |
| 3/4″ Copper – Timber Nail | 39116 | 100 | 15 |
| DESCRIPTION | CODE | BAG QTY | CTN QTY |
|---|---|---|---|
| 18mm PB – Masonry Nail | 39211 | 100 | 20 |
| 18mm PB – Tek Screw | 39212 | 100 | 20 |
| 18mm PB – Timber Nail | 39213 | 100 | 20 |
| 22mm PB – Masonry Nail | 39214 | 100 | 15 |
| 22mm PB – Tek Screw | 39215 | 100 | 15 |
| 22mm PB – Timber Nail | 39216 | 100 | 15 |
| DESCRIPTION | CODE | BAG QTY | CTN QTY |  |
|---|---|---|---|---|
| 16mm PEX – Masonry Nail | 39311 | 100 | 20 |  |
| 16mm PEX – Tek Screw | 39312 | 100 | 20 | |
| 16mm PEX – Timber Nail | 39313 | 100 | 20 | |
| 20mm PEX – Masonry Nail | 39314 | 100 | 15 | |
| 20mm PEX – Tek Screw | 39315 | 100 | 15 | |
| 20mm PEX – Timber Nail | 39316 | 100 | 15 | |
| 25mm PEX – Masonry Nail | 39317 | 100 | 15 | |
| 25mm PEX – Tek Screw | 39318 | 100 | 15 | |
| 25mm PEX – Timber Nail | 39319 | 100 | 15 | |
| DESCRIPTION | CODE | BAG QTY | CTN QTY |
|---|---|---|---|
| Duo Clip | 39501 | 50 | 500 |
Please fill out the form with your contact information and a brief description of how we can assist you.
We value your time and will make every effort to respond within 24 hours. Thank you for reaching out to us. We look forward to connecting with you soon.
After the installation of your Pop Down® waste, if you find that it does not hold water when closed there may be an installation issue. A simple test can be conducted to see if water is passing around the waste (in the case of an installation fault), or through the waste, which would be a product fault.
To test, close your Pop Down® waste and partially fill your basin with water. If the water empties from the basin but does not empty from the well above the Pop Down® mechanism, it would suggest an installation fault. In this case you would need to call the installing plumber.
If the water empties from the basin and also empties from the well above the Pop Down® mechanism, it would suggest a product fault. In this case, contact us and we will send a replacement mechanism.
